Opticenter

opticenter

What is opticentric ®?

With its extremely high degree of centration accuracy and integrated operation, OptiCentric ® systems are indispensable in modern optics productions.

Why choose Onde?

Our experts will do everything to meet the needs of your business. Your city, your fleet, your language, your logo, your brand. All Onde products are humane and intuitive. Our system is easy to use. One action per click. Every time. For everyone. Onde makes payment processing and management as easy as pie.

Which opticentric® Systemes are suitable for edge centering with lensalign?

The cementing of lenses on an a arbor for later edge centering is an automated process and is thus independent of the user for all OptiCentric ® systemes with LensAlign. For alignment and bonding of large optics into its cell, all OptiCentric ® UP Systems are suitable.

Which opticentric ® system should I Choose?

All OptiCentric ® systems with air bearing are suitable for the testing of optical systems incl. all interior surfaces. If the system is made up of more than 20 surfaces, the Dual variant is recommended, and for measuring air gap and center thickness the version 3D.

What is the opticentric® system?

The OptiCentric ® system, equipped with an autocollimator head with reticle and corresponding head lens, is used for measurement in reflection. To perform the measurement the measurement head with the head lens is focused on the center of curvature of the lens surface being tested.

What is opticentric ® linear?

OptiCentric ® Linear makes fast and precise measurement of immovable samples in any orientation (e.g. horizontal) The user of an OptiCentric ® system controls the entire measurement, alignment and cementing process via the OptiCentric ® software.

What is the opticentric ® 100?

The OptiCentric ® 100 permits centration testing as well as cementing and bonding of lenses with a diameter of 0.5 mm to 225 mm. Motorized or manual stage with 450 mm travel path as standard, (optional 250 mm or 550 mm) Highly precise lens centering measurement, alignment and assembly systems

Which opticentric ® system should I Choose?

All OptiCentric ® systems with air bearing are suitable for the testing of optical systems incl. all interior surfaces. If the system is made up of more than 20 surfaces, the Dual variant is recommended, and for measuring air gap and center thickness the version 3D.

Which opticentric ® system should I Choose?

All OptiCentric ® systems with air bearing are suitable for the testing of optical systems incl. all interior surfaces. If the system is made up of more than 20 surfaces, the Dual variant is recommended, and for measuring air gap and center thickness the version 3D.

How do I align cemented elements with opticentric®?

The manual alignment of cemented elements by malling or air blasts can be carried out with all OptiCentric ® systems. There are various rotation and holding devices available for holding the lower lenses. For the automated alignment of cemented elements, there are special attachments called LensAlign available for all OptiCentric ® systems.

What is the difference between aligning and cementing for trioptics?

For TRIOPTICS, the following applies: Cementing using LensAlign… is the alignment and cementing of single lenses in relation to one another (doublets or higher value bond links) or on a centering arbor. The term cementing is used for the alignment and cementing of lenses to one another.

What is the lensalign alignment tool?

This unique tool is used especially successfully in the automated LensAlign alignment modules and bonding systems. The precise centration and alignment of a lens is crucial for the image quality of the optical system.

Postagens relacionadas: